"fAuxLICE"

An 3D printable Alice-like mechanical keyboard

Layout

Keyboard Layout Editor

Components

Required components

• 64× switches of your choice
• 4× plate-mounted Costar stabilizers
• 108-key keycap set
• 64× diodes
• Wires
• 14× M3×16 countersunk screws
• 2× M3×12 countersunk screws

Optional components

• 1x M3×8 countersunk screw
• 1x M3×10 countersunk screw
• 1x M3×12 countersunk screw
• 1× M3×16 countersunk screw
• 1× M3×20 countersunk screw

The optional components are for reinforcing the top halves. They're not required. A proper glue up would be probably enough for the two halves.

Wiring diagram

The keyboard is wired in a 5-row, 14-column configuration. Sorry for starting my row/column index at 1!

Firmware

The firmware included is for the STM32F103 "Blue Pill" board.

The STM32duino bootloader is not necessary. Simply flash the board using an ST-Link programmer.

More info

More info can be found in this blog post.

License

This project is licensed under the MIT license. See the LICENSE.md for more details.